Turnigy dlux 100A SBEC Brushless Speed Controller w/Data Logging

Description

Turnigy® dlux SBEC ESCs have set a new bench mark in quality and performance. Each ESC uses a twin PCB design separating the motor power supply, MCU and SBEC. This design allows for optimum component layout on each PCB and provides the ideal configuration for heat dissipation and thermal efficiency. Both PCBs are enclosed in a full aluminum heat sink casing to ensure maximum heat dispersion. All Turnigy dlux ESCs can be programmed via a programing card or by transmitter. Clear and easy to understand instructions are included.

*Now featuring data logging viewable when used with Turnigy dlux programming box.

Data logging display parameters:
Max Temperature
Environment Temperature
Max Current
Min Current
Max Voltage
Min Voltage
Nominal Voltage
Off Voltage
Motor Run Time
Power on Time
Motor Pole Number
Max Motor RPM
Error Times

Spec.
Max Cont. Current: 100A
Max Burst Current: 120A
Max BEC Current: 3A
BEC Voltage: 5.5v
LiPo: 2~6S
NiMH: 5~16cells
Weight: 96grams
Max RPM (2-pole): 200,000rpm
Size: 69 x 33 x 23mm
Motor Plug: Female 4mm bullet Connector
Battery Plug: Nil

Features.
Extremely low internal resistance
Very low operation temperature
Over temperature protection
APEC MoSfets (Taiwain)

Programming Options.
Battery Type: 2S~6S
Forward/Reverse
Soft Start
LV Cut off Type (Ignore, Reduce Power, Stop Motor)
LV Cut off setting (2.5~3.5v in 0.1v increments)
Timing (Auto, Medium, High)
Switching (8,16kHz)
Factory Restore
Active RPM Control: On/Off (Governor Mode)

Default factory settings.
Brake: off
Battery: LiPo Auto Detect
Low Voltage: 3.2v (power down motor)
Timing: Auto
Frequency: 8KHz

Note: Programming box now available, check the related items below.

Max Cont. Current: 100A (label states 70A incorrectly on 1st batch)
Max Burst Current: 120A
Max BEC Current: 3A
BEC Voltage: 5.5v
Lipo: 2~6S
NiMH: 5~16cells
Weight: 96grams
Max RPM (2-pole): 200,000rpm
Size: 69 x 33 x 23mm
Motor Plug: Female 4mm bullet Connector
Battery Plug: Nil
Battery Type: 2S~6S
Active RPM Control: On/Off (Governor Mode)
Brake: off
Battery: LiPo Auto Detect
Low Voltage: 3.2v (power down motor)
Timing: Auto
Frequency: 8KHz
Max Cont. Current: 100A