BetaFPV Meteor65 1S PNP

Meteor65 will start to sale on 11th Nov.
Your best choice of tiny whoop in winter- Meteor65. Equip with lastest BT2.0 solid connector 1S battery, lightest 2.69g 1S FC and stronger power system, you’ll immediately notice how fantastic on 22.84g Meteor racer are at takeoff, feels amazing as you hover around indoor, then let it rip and haul around the house!

Bullet Point

• Meteor65 is powered by brand-new solid pins BT2.0 1S battery. BT2.0 pins connector effectively decreases internal resistance of connector for much better discharge perform compare to initial PH2.0 connector, which offers better power than ever 1S battery
• You can enjoy more flight time without disturb of low voltage warning through solving the problem of voltage sag
• Apply the perfect lightest combo for better performance on function with minimum weight- F4 1S FC V2.1(2.6g) & M01 AIO camera VTX(3g). Flight controller pre-soldered the BT2.0 solid pin cable, which can provide more stable and powerful 9A continuous current
• The package comes with 1*BT2.0 300mAh 1S lipo and 1*BT2.0-PH2.0 adapter cable. The adapter cable is convenient to charge BT2.0 battery with your stock PH2.0 charger. Meanwhile, we also release all-in-one BT2.0 Battery Tester & charger for your need.
• Meteor65 frame shaves off 0.75g pushing the weight down to only 3.08g. The battery slot is closer to the center of gravity for smoother flying experience, and you will land on the motor screws instead of the battery
• Using the latest 0802 22000KV motors, which features ball bearing and lead wires soldered to PCB to allow you to repair it easier once disconnection. Perfect match with 31mm 3-blade props provides you completely different powerful indoor flight

Specification

• Weight: 22.84g (without battery)
• Frame: Meteor65 1S Brushless Frame
• Motors: 0802 22000KV Motors
• Props: 31mm 3-blade props (1.0mm Shaft)
• Camera: M01 AIO Camera
• Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS
• Battery: 1* BT2.0 300mah 1S Battery
• Flight time: 2:30 mins in a smooth indoor flight, 2 mins in full throttle indoor flight

BT2.0 300mah 1S Battery

BETAFPV exclusive designed solid pins BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector decreased internal resistance of connector effectively to allow more current that is transferred, which means it supports 9A continuous current(10A burst) offers stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A You can enjoy more flight time without disturb of low voltage warning through solving the problem of voltage sag.

F4 1S Brushless Flight Controller V2.1

The lightest F4 1S brushless FC in the current market. With slim and sleek design, 2.69g in weight and better performance on function for maximum weight savings, power, and responsiveness. For more instruction, click here to reach.

SPECIFICATIONS OF FC & ESC

• CPU: STM32F411CEU6 ( 100MHZ )
• Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
• Firmware version: Betaflight MATEKF411RX (MK41R)
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
• Current: 5A continuous and peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: O_L_5_REV16_6.HEX

M01 AIO Camera 5.8G VTX

The unit is ultra-lightweight only 3g, perfect for Meteor65. It comes with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna, features 6 bands and 48 channels on the 5.8GHz band with Raceband. For more instruction, click here to reach.

Meteor65 1S Brushless Frame

Meteor65 frame shaves off 0.75g pushing the weight down to only 3.08g compared to weight 3.8g Beta65 Pro frame. The battery slot is closer to the center of gravity for smoother flying experience, and you will land on the motor screws instead of the battery.

Package

• 1 * Meteor65 Brushless Whoop Quadcopter (1S)
• 1 * 300mAh 1S 30C Battery with BT2.0 connector
• 1 * BT2.0-PH2.0 Adapter cable
• 1 * Spare camera mount with 25° tilt