Join to our channels: new products, coupons, best deals:
RTF/ARF/PNF
Kingkong LDARC 130GTI-HD 133mm F4 4S PNP
Multirotors → FPV Racing drones → RTF/ARF/PNF → 3" Quads → Kingkong LDARC 130GTI-HD 133mm F4 4S PNPLDARC 130GTI-HD 133mm F4 OSD 3-4S FPV Racing Drone PNP BNF w/ Caddx.US Turtle V2 1080P Camera
Specification:
Brand Name: LDARC
Model: 130GTI-HD
Item Name: 133mm F4 OSD 3-4S FPV Racing Drone PNP BNF
Wheelbase: 133mm
Bottom Plate Thickness: 4mm
Version: PNP ( Without Receiver) / BNF ( With AC2000 Receiver Compatible S-FHSS & D16 Non EU & D16 EU-LBT )
Net Weight: 139.1g ( Not Included battery)
Package Included:
1x LDARC 30GTI-HD FPV Racing Drone
1x Canopy
2x TPU Landing Parts
Specification:
Brand Name: LDARC
Model: 130GTI-HD
Item Name: 133mm F4 OSD 3-4S FPV Racing Drone PNP BNF
Wheelbase: 133mm
Bottom Plate Thickness: 4mm
Version: PNP ( Without Receiver) / BNF ( With AC2000 Receiver Compatible S-FHSS & D16 Non EU & D16 EU-LBT )
Net Weight: 139.1g ( Not Included battery)
LDARC F4 OSD Flight Controller | Brand Name: LDARC Item Name: F4 OSD Flight Controller Mounting Hole: 20x20mm Size: 25x25mm Net Weight: 4g Firmware: MatekF411 - Support SBUS, PPM, DSMX, Ibus Receiver - Integraded with Betaflight OSD - With 5V port for camera - Support Voltage monitor, buzzer and LED |
LDARC 20A BLheli_S 4In1 ESC | Brand Name: LDARC Item Name: 20A BLheli_S 4In1 ESC Con. Current: 20A Peak Current: 25A Input Voltage: 2-4S Supported Firmware: BLheli_S ( G_H_30 ) Mounting Hole: 20x20mm Size: 28x31mm Net Weight: 5g |
LDARC 5.8G 48CH 0/25/100/200mW FPV Transmitter | Brand Name: LDARC Item Name: 5.8G 40CH 0/25/100/200mW Switchable FPV Transmitter Input Voltage: 2-6S Lipo Supported Output to camera voltage: 5V Channel: 48CH Power: Off / 25mW / 100mW / 200mW Mounting Hole: 20x20mm Size: 25x25mm Net Weight: 2.0g How to use VTX: Blue Light points at the CH indicator ( CH1-CH8, flashes 1-8 times) Green Light points at the Band Indicator ( Band A- Band F, flashes 1-6 times) Red Light points at the Power Indicator (25-100mW, flashed 1-3 times) |
LDARC XT1406 3600KV Brushless Motor | Brand Name: LDARC Model: XT1406 Item Name: 1406 3600KV 2-4S Motor Brand Name: LDARC Model: XT1406 KV: 3600KV Input Voltage: max. 4S Lipo Shaft Diameter: M5 Motor Mounting Hole: M2 ∅12 Motor Width: 18mm Motor Height: 28.55mm Weight: 13.2g (with cable and nut) |
LDARC 3050 3-Blade Propeller | Brand Name: LDARC Item Name: 3050 3x5 3 Inch 3-Blade Propeller Color: Yellow Quantity: 10 CW & 10 CCW |
Caddx.US Turtle V2 HD Camera | Image sensor: 1/2.7" CMOS sensor Horizontal: 800TVL TV system: NTSC/PAL,changeable Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps Power Input: DC 4.5-20V FPV FOV: 155° Recording FOV: 170° Mini Illumination: 0.01lux Image Resolution: 2 Megapixels Lens: 1.8mm Turbo Eye Lens Working Current: 380mA@5V/160mA@12V (low consumption) OSD Menu: Yes (Support Voltage Display) Video Files: MP4 Audio: Support Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II) Net weight: 12g |
AC2000 Dual-core Tri-mode RSSI Receiver ( Only BNF Version ) | Item Name: AC2000 Mini Receiver Rated voltage 4.0V~6.0V Size 14 x 26 mm Weight 1.8g Support S-FHSS(8 CHs)/D16 non-EU(14 CHs)/D16 EU-LBT(14 CHs) three modes, output S.BUS signal The channel 16 of S.BUS value is real-time RSSI, BETAFLIGHT OSD can display this RSSI value in screen. |
Recommend Lipo Battery ( NOT Included) | Recommend 3-4S 600-800mAh Lipo Battery |
Package Included:
1x LDARC 30GTI-HD FPV Racing Drone
1x Canopy
2x TPU Landing Parts
Share
Prices for Kingkong LDARC 130GTI-HD 133mm F4 4S PNP in stores
Deals found: 26 ()
See also
Kingkong LDARC 130GTI-HD 133mm F4 4S BNF AC2000
$224
Kingkong/LDARC 130GTI 133mm frame
$28
Batteries for LDARC 130GTI
LDARC 130GTI parts
3" Quads