Introduction:
Frame supports three flight control mounting holes: 26.5x26.5mm/25.5*25.5mm/ 20*20mm
And 20x20mm image transmission hole, you can install the mainstream AIO flight control and VISTA image transmission and most of the analog image transmission on the market.
The motor holes of 9x9mm/ 12x12mm can be installed with 1404-1408 series motors, and the power output is strong with 3-inch blades.
Ultra-light body weight. Improved the shock-absorbing design of the pan-tilt to provide a more stable shooting effect.
Equipped with a naked dog mounting base, you can install naked Gopro 8 and Insta360 Go2 cameras.

Features:
1. Small size, light weight, good flying feel
2. Improved the shock-absorbing gimbal hole position to provide a more stable shooting effect
3.9x9mm motor holes can be installed with 1404 and 1408 motors with sufficient power
4. Designed the GOPRO camera base, perfect installation of GoPro Hero 8
Naked Camera and INSTA 360 GO 2 cameras
5. Designed 3D prints for the receiver to facilitate the installation and frequency of the receiver

parameter:
Name: HSKRC CL3 3 inch carbon fiber frame
Wheelbase: 135MM
Weight: about 41g (including protective ring weight: about 61g)
All-in-one arm. Upper plate thickness: 2.5MM
Other board thickness: 2MM
Lower board thickness: 1.5MM
Height inside the rack: 35MM (suitable for 3-story fly tower)
Flight control mounting holes: 20*20/25.5*25.5/26.5*26.5
Camera mounting hole distance: 19*19 (MICRO camera)
Motor mounting holes: 9*9/12*12(M2)
Recommended configuration:
Flight control: mini F405/mini F722
ESC: 20A/25A/30A /35A mini 4 in--ESC
Motor: 1 206/1404/ 1408/1506/1507
Propeller: Maximum support 3 inch propeller 3020
Battery: 3S/4S 550MAH-1000MAH 75C/ 100C