HSKRC Assassin 5" 225mm Frame Kits

The installation size of the FPV lens is 19*19. The middle section has 30.5*30.5 and 20*20 mounting holes, and the second half is also provided with 30.5*30.5 mounting holes, so there are more directions in choosing the flight control. The 30.5*30.5 in the middle section has been equipped with soft-installed silica gel, which can reduce the pressure on the flight control caused by vibration to a greater extent, so as to achieve smooth flight.
With a height of 30mm, the three-layer fly tower can be easily installed, and with the 30.5*30.5 installation holes in the second half, it can easily install card recording and other equipment.
The plate nut is pressed into the 5MM left and right integrated machine arm, which can improve the strength of the machine arm while being simple in design. It is easy to install and disassemble, reduce the vacant position of the aircraft, increase the strength of the frame, and make the flight more stable.
The arm of the frame and the upper and lower plates are all chamfered. The plan of using countersunk screws on the upper plate makes the loading surface more flat.
High-quality 3K twill full carbon fiber, high-precision CNC processing.
There are also exclusive 3D printed parts for the rack, which are beautiful and effectively improve the protection of low-speed impacts, allowing players to provide protection while flying while reducing losses. Of course, there are also customized thickened aluminum columns to ensure the strength of the frame!
The new special-shaped structure, no matter FPV or recording, the picture is clean and there will be no blades!

Product specifications
Support up to 5 inch paddle
Wheelbase 225MM
Size 145*172MM
Inner height 25MM
Suitable for 19MM camera
Weight: 124.7G
Floor thickness 3MM
Top plate thickness 2MM
Arm thickness 5MM
Protection frame thickness 2MM
Arm width 10MM

Recommended configuration
Flight control RF/KISS/F4/F3/F7
Motor 2205 2206 2207 2305 2306
ESC 30A-50A
Battery 4S1500MAH-6S 1150MAH