After our popular TITAN DC5 (DeadCat style frame) approach we decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle.

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

HIGHLIGHTS:

- 6mm arm design for more durability

- XING 2208 motors (4S 2450KV/6S 1800KV) for more power

- GPS pre-installed for more safety at distance

- Variable GoPro TPU mount (supports ND-Filter inserts)

- 360° TPU protection and Antenna mounts

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

- GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour.

Please check our linked article on "GPS Rescue Mode // Setup"

FRAME // TITAN XL5：

- Weight ：145g

- Wheelbase: 250mm

- Main body dimension: 185*133mm

- Bottom to top distance: 30mm

- Arm thickness: 6mm

- Bottom plate thickness: 2mm

- Top plate thickness: 2mm

- Camera plate thickness: 2mm (2.5mm included TPU inserts)

ELECTRONICS // SucceX-E F4 Stack (45A 4-in-1 ESC)：

SucceX-E F4

- MCU：STM32F405

- IMU：MPU6000

- Betaflight OSD：YES

- Blackbox：8MB

- 4X Uarts（1 2 3 6 )

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX protocol：YES（IRC Tramp）

- WS2812 led Strip：YES

- Baro：No

- Beeper：YES

- Input：2-6S（Max 8S）

- BEC：5V/2.5A cont

- Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex

Product Link

SucceX-E 45A 4in1

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight:14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

- Target: G-H-30 BLS 16.7

Product Link

SucceX Force 5.8GHz 800mW VTX Adjustable

Feateures:

- The output power is stable;
- Transmit power 4 gear switch: 25mW/100mW/400mW/800mW;
- Output 40 channels.
- Frequency lock fast, the boot does not interfere with companions;
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption:
7V～36V，+12V/380mA@800mW;
- Small size:36363mm
- Mounting holes 4-M3
- Lightweight: 7.2g(excluding antenna)

Specs:
- Item: SucceX-Force 800mW adjustable VTX
- Input voltage: 7-36V
- Output voltage/ Max current: 5V 1A
- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW，250mA@400mW, 380mA@800mW
- Channel: 40
- size:36363mm
- PIT/25mW/100mW/400mW/800mW
Product Link

BNF // Parts list (Build)

-1x TITAN XL5 4S 6S FPV Drone - BNF

- 2 sets Nazgul 5140 propellers

- 1x GPS Module

Additional Suggested Parts (optional)

- Battery 4S 1550mAh，6S 1300mAh

- Adjustable GoPro mount (0-40°)

Prices for iFlight TITAN XL5 SucceX-E F4 4S PNP in stores

Deals found: 31 (iFlight-RC¹, Banggood¹)

Store	Stock level	Lot price	Shipping cost	Coupon / promocode	Pcs./lot	1pc price
iFlight-RC	Preorder	$367			1	$367
Banggood	Out of stock	$402			1	$402

RTF/ARF/PNF

iFlight TITAN XL5 SucceX-E F4 4S PNP

PRE-TUNED & PRE-SETUP:

SucceX Force 5.8GHz 800mW VTX Adjustable

Feateures:

Prices for iFlight TITAN XL5 SucceX-E F4 4S PNP in stores

See also